Shamir Creation | Semi finished Progressive Lenses - Digital Cast Thin & Flat Lens w/ Wide Distance Zones

Technical Information

Shamir Creation® Technical Flyer

Shamir Creation™ Progressive Lens Fitting Instructions

Shamir Creation® Progressive Lens Fitting Instructions

Lens Frame Fitting

Before taking any measurements, make sure the patient is sitting straight, without any back support.
Adjust the frame to correctly fit the patient.
Ensure a pantascopic tilt of 10"-12".
Minimize the vertex distance by fitting the frame as close to the face as possible. This will ensure a wide field of vision at all ranges.

Technical Information (continued...)

Pupil Distance Measurement

Be aware that the PD can differ from eye to eye.

When using a pupilometer for measuring pupil distance, verify the result through a manual test.
If a pupilometer is not available:
- Position yourself at the patient’s eye level, making sure he is looking directly into your eyes.
- Mark the pupil center on the demo lens in the lens frame.
- Place the demo lens on the centration chart and read the monocular PD.

Height Measurement Fitting

Be aware that the fitting height can differ from eye to eye.

Technical Information (continued...)

Cut-Out Confirmation

Lens Verification

If lenses are not marked, restore the markings with the Creation marker.
Fit the completed eyeglasses on the patient and verify that the fitting cross is aligned with the pupil center.

Shamir Creation® Technical Sheets