Technical Information

Shamir Autograph II® Technical Flyer

Download the Shamir Autograph II® Technical Flyer (PDF)

Shamir Autograph II® Fitting Instructions

Frame Fitting

• Before taking any measurements, make sure the patient is sitting straight, without any back support.

• Make sure the patient adjusts so that it sits on their bridge as it will be worn.

Technical Information (continued...)

Pupil Distance Measurement

Be aware that the PD can differ from eye to eye.

• When using a pupilometer for measuring pupil distance, verify the result through a manual test.

• If a pupilometer is not available:

• Position yourself at the patient’s eye level, making sure he is looking directly into your eyes.

• Mark the pupil center on the demo lens in the frame.

• Place the demo lens on the centration chart and read the monocular PD.

NEXT>>

<<BACK

Technical Information (continued...)

Height Measurement Fitting

Be aware that the fitting height can differ from eye to eye.

• Position yourself at the patient’s eye level.Mark the pupil center on the demo lens in the frame.

• Cut-Out Confirmation

• Check both the right and left lenses.

• Align the pupil center marking over the cross on the centration chart.

• Make sure the frame shape falls within the selected lens diameter.

Technical Information (continued...)

Lens Verification

• If lenses are not marked, restore the markings with the marking pen marker.

• Fit the completed glasses on the patient and verify that the fitting cross is aligned with the pupil center.